Double slip for manual operation, left hand crossing, 15°. Adaptable for electric point motor. Track 9136 serves as opposite curve and leads to the parallel track distance of 33.6 mm. As delivered, all track exits deliver power into one circuit. By removing the wire bridge clips the crossing tracks become electrically isolated from each other. On the ”crossover“ setting, another track circuit can be traversed. On the ”branch-off“ setting, the current is separated at the centre of the slip. Electric point motors can be clipped on later either to the right or left as desired (above or below baseboard surface operation is possible). Measurements and geometry as 9162/63. |