Gaugemaster GM377 Traffic Light (OO) Working

This working traffic light is delivered pre-assembled and ready to fit into your model. It is easy to fit and wire up. All you need to do is drill a hole where you want the light, attach two wires to the base and power it with a 9 - 16v supply. It can also be controlled with DCC programming by linking it to your DCC Bus wire.

The traffic light operates just like a conventional one found on British streets. The sequence lasts between 9 and 30 seconds so that if you have more of them on the layout they won't all change at once.

For that finishing touch, you can add a thin white line to the outside of the head which enhances the detail and makes them look that little bit more realistic.

This pack contains one working Traffic Light and one dummy (non lit). If you would like a pair of working Traffic Lights, then you might consider GM378 Traffic Lights Set.

You will need either a 9 - 16v DC power supply or a feed from your DCC track. We recommend using a GMC-WM4 Wall Mounted Transformer to power these lights on a DC model railway.