This decoder has been factory set to be used in the Class 43 HST Units. Function list: - F0 - Headlight/Rear-Light
- F1 - Engine Start/Stop
- F2 - Horn High-Low
- F3 - Horn Low-High
- F4 - Brake Squeal
- F5 - NOTCH Up
- F6 - NOTCH Down
- F7 - Return to IDLE
- F8 - Thrash
- F8 - Cold Start Override
- F9 - Compressor
- F10 - Cab Door Slam
- F11 - Fan
- F12 - Horn Long High
- F13 - Horn Long Low
- F14 - PrimerSlow Flange Squeal
- F15 - Spirax Valve
- F16 - Horn Short Low
- F17 - Horn Short High
- F18 - Windscreen Wipers
- F19 - AWS TestFire Bell Test
- F20 - Guards Whistle
- F21 - Guard to Driver Buzzer
- F22 - Aux Lighting
Specifications: - Supports short and long decoder addresses
- Adjustable acceleration and deceleration
- Back EMF load compensation
- Up to 19 controllable spot sounds dependent on model including whistles or horns etc
- Two sound channels allowing for simultaneous play of full locomotive engine sounds, & individual spot sounds e.g. horns, whistles, brakes, wagons coupling etc. NOTE: Only one spot sound can be played at the same time
- It is possible to alter the volume of each sound through an individual dedicated CV. Range 0-8
- Decoder is equipped to support directional front and rear lighting operation via F0 on the controller, providing that the product is fitted with lights
- The decoder is equipped with 1 aux function output controlled by F18 or F25 dependent on locomotive type (diesel or steam)
- Motor current - maximum continuous 500mA
- Motor current - peak 1amp (no function load)
- Function output current maximum—100mA (unprotected)
- Decoder current maximum continuous - 800mA (shared motor and functions)
- Number of sound channels - 2
- Termination - 8 pin plug NEM652. NMRA
This decoder cannot be used in Analogue operation.
|
