Train Tech DS1R DCC Signal (RH Feather) 2 Aspect Home

Colour light signal based on the signals used on modern railways. These signals are quick and easy to install and do not require any soldering. These signals are pre-built and just need to be inserted into the track using the two prongs attached to the signal. If you have already laid your track you can add wires to them rather than using the prongs.

These signals are fitted with an illuminated Feather which is controlled using a separate DCC address.

Be sure to read the instructions carefully before attempting to set up this signal.

Signal Details:

• 2 Aspect Home Signal
• Pre-Assembled LED Stem
• Fitted Feather
• DCC Decoder in Base
• Clips Straight into the Track
• Includes Detailing Pack
• Easy to Follow Instructions

LED Colours:

• 1 x Red
• 1 x Green

CLICK HERE to view an article on the Train Tech Digital Signals.